IBM ThinkPad 760CD Скачать руководство пользователя страница 245

Страница: 245 / 370

Installing PCMCIA Device Driver for DOS

Press Enter.

Press Enter again when the confirmation message
appears.

The Installation Options menu appears.

Follow the instructions on the screen.

Note:
Whenever you update the
CONFIG.SYS file, see page 293.

After the installation is complete, close all applications
and remove the diskette from the diskette drive.

You have completed the installation of the PCMCIA device driver for
DOS.

If you want to continue to install all device drivers, continue with the
Mwave DSP support software.

Chapter 7. Installing Software

229

Title: C78TFMST CreationDate: 07/11/95 14:33:57

Содержание ThinkPad 760CD



















































































































































































































































































































































































Результаты поиска

Содержание ThinkPad 760CD

Отзывы:

IBM ThinkPad 760CD, Руководство пользователя, Страница: 245 / 370

Результаты поиска

Содержание ThinkPad 760CD

Отзывы: