IBM ThinkPad 760CD Скачать руководство пользователя страница 127

Страница: 127 / 370

Replacing the Battery Pack

Warning:

Make sure the CD-ROM tray is
closed and no CD is in the
CD-ROM drive.

Lift the handle on the CD-ROM drive with the plastic
tape, and remove the CD-ROM drive.

Some pressure might be needed to remove the CD-ROM drive
if it is tight.

Pull the battery pack toward the front of the computer;
then quickly remove the battery pack and replace it with
a fully charged spare.

Warning:

Do not press on the middle part of
the CD-ROM drive.

Reinstall the CD-ROM drive.

Make sure the CD-ROM handle snaps into place after
installing the CD-ROM drive.

Close the keyboard. The computer resumes normal
operation.

If the computer does not resume normal operation, press the
Fn key.

Chapter 4. Using Battery Power

111

Title: C78TFMST CreationDate: 07/11/95 14:33:57

Содержание ThinkPad 760CD



















































































































































































































































































































































































Результаты поиска

Содержание ThinkPad 760CD

Отзывы:

Похожие инструкции для ThinkPad 760CD

Бренды по названию

Популярные бренды

IBM ThinkPad 760CD, Руководство пользователя

Результаты поиска

Содержание ThinkPad 760CD

Отзывы:

Похожие инструкции для ThinkPad 760CD

Бренды по названию

Популярные бренды