IBM ThinkPad 760CD, Руководство пользователя

Страница: 227 / 370

Installing IBM OS/2 Warp
Note:
Because your CD-ROM drive is not
installed in the computer at this time
and cannot be recognized
automatically by OS/2 Warp, you
need to make OS/2 Warp recognize
the CD-ROM drive.
b) Follow the instructions on the screen. Be sure to pay
attention to the following during installation:
Select VGA as the Primary Display at the System
Configuration screen.
Do not select the PCMCIA Feature at the System
Configuration screen. Leave it as No Support
Installed.
Select Non-Listed IDE CD-ROM for the CD-ROM at
the System Configuration screen.
c) When OS/2 Warp installation is complete, shut down OS/2
and turn off the computer.
d) Replace the diskette drive with the CD-ROM drive.
e) Turn on the computer.
Note:
If you have the OS/2 Warp 3.0
FixPak WFP_ (XR0W005), install it
after you complete the installation of
OS/2 Warp. Follow the instructions
in the README.1ST file in diskette 1
of that FixPak.
10
Clean up (optional).
The previous steps leave about 45MB of image files on your
hard disk drive. If you plan to reinstall soon, or install to
another hard disk drive, you might want to leave the files in
place. If you want to remove them to save hard disk space:
a) Open the OS/2 System folder.
b) Open the Drives folder.
c) Open [ c:] drive.
d) Click on the OS2IMAGE folder with the right mouse button
to bring up the folders menu.
e) Click on the Delete menu.
f) When you are asked to confirm deletion, choose Yes.
If you want to continue to install all device drivers, continue with
“Installing the CD-ROM Device Driver for OS/2” on page 212.
Chapter 7. Installing Software
211
Title: C78TFMST CreationDate: 07/11/95 14:33:57