IBM ThinkPad 760CD, Руководство пользователя, Страница: 309 / 370

Advanced Information for PC Cards
D O S
Starting the Auto Configurator Utility for DOS
To use the Auto Configurator Utility for DOS, do the following:
Note:
A script file contains the steps to
enable the PC Card and the
resource information for the I/O port,
IRQ level, or memory address.
1
Create an AUTODRV.SCR file in DOS by gathering all
the script files of the PC Cards you want to enable.
For information on writing a script file, refer to AUTODRV.DOC
in the directory containing the script file.
2
Enter the following command at the DOS command
prompt:
>AUTOUTL /D
The utility (AUTOUTL.EXE), script file (AUTODRV.SCR), and
Auto Configurator itself (AUTODRV.SYS) must all be in the
same directory.
Adding to the CONFIG.SYS File
For PC Card Director to work correctly, the PC Card device drivers
(which make up the structured file of PC Card Director) must be
registered in the CONFIG.SYS file. These drivers are automatically
registered in the CONFIG.SYS file when you install PC Card Director
following the instructions in Chapter 7. The following shows each
driver registered in the CONFIG.SYS file and the standard rules.
Appendix B. Advanced Information for PC Cards
293
Title: C78TFMST CreationDate: 07/11/95 14:33:57