IBM ThinkPad 760CD, Руководство пользователя, Страница: 278 / 370

What If Your Computer Does Not Work?
Other General Problems
Message Action
Test menu.
Exit
Restart
Start
SystemBoard Memory Display HDD-1 FDD-1 Parallel PCMCIA-1
1 1
1
PCMCIA-2 FDD-2
2 2
HDD-2
2
HDD-3
3
Serial
CD-ROM DSP Audio Infrared
Select the Start icon and follow the instructions to test your system.
If you cannot go beyond the first screen, have the computer serviced.
If the computer stops during testing and does not continue, have the
computer serviced.
If testing does not find a problem but one still exists, find the problem in
“What If Testing Cannot Find the Problem?” on page 264.
POST error prompt.
ERROR
OK Cancel
An error was found during the POST. Press Enter; then select Start from the
test menu to run the test.
If the test ends with an error, make a note of the error code and have the
computer serviced.
Error prompt. Turn off the computer and start Easy-Setup; then select Test to test the
computer.
You can start the operating system by pressing F1 instead and ignore the error.
A screen or message that
is not listed. Turn off the computer and start Easy-Setup; then select Test to test the
computer.
If you cannot start Easy-Setup, have the computer serviced.
Problem Cause or Action
The computer enters
suspend mode
automatically. The computer enters suspend mode automatically when the processor
temperature is higher than a certain degree. This is not a defect.
The computer
performance is getting
worse in an environment
where the temperature is
higher than the product
specifications. (See
“Specifications” on
page 327.) Processor speed may decrease if the computer is used in a high-temperature
environment. This is not a defect.
262
IBM ThinkPad 760CD User's Guide
Title: C78TFMST CreationDate: 07/11/95 14:33:57