IBM ThinkPad 760CD, Руководство пользователя, Страница: 223 / 370

Installing IBM OS/2 Warp
Installing OS/2 Warp with the Boot Manager
When you install OS/2 Warp with the Boot Manager:
1
Install the Boot Manager, referring to the OS/2 Warp
documentation.
To install the DOS ThinkPad
Features program:
Page 227.
To install the Windows ThinkPad
Features program:
Page 237.
2
Install DOS and Windows, and the ThinkPad Features
programs for both DOS and Windows.
3
Install OS/2 Warp.
If you are installing the diskette version of OS/2 Warp,
refer to the documentation.
Be sure to pay attention to the following during installation:
– Select VGA as the Primary Display at the System
Configuration screen.
– Do not select the PCMCIA Feature at the System
Configuration screen. Leave it as No Support
Installed.
– Select Non-Listed IDE CD-ROM for the CD-ROM at
the System Configuration screen.
After OS/2 has been successfully installed, make sure you
restart the computer.
If you are installing the CD-ROM version of OS/2 Warp
using the CD-ROM drive, choose one of the following
according to your configuration:
– To use the CD-ROM drive and an externally attached
diskette drive, go to “Installing OS/2 Warp Using an
External Diskette Drive” on page 208.
Note:
If you have the OS/2 Warp 3.0
FixPak WFP_ (XR0W005), install it
after you complete the installation of
OS/2 Warp. Follow the instructions
in the README.1ST file in diskette 1
of that FixPak.
Note:
You need at least 90MB of free
space on the hard disk drive.
– To use the CD-ROM drive and the internal diskette
drive and be able to switch between them, go to
“Installing OS/2 Warp Using the Internal CD-ROM and
Diskette Drive” on page 209.
Chapter 7. Installing Software
207
Title: C78TFMST CreationDate: 07/11/95 14:33:57