IBM ThinkPad 760CD, Руководство пользователя

Страница: 224 / 370

Installing IBM OS/2 Warp
Installing OS/2 Warp Using an External Diskette Drive
1
Ensure that DOS and Windows are installed in the
computer.
2
Insert the OS/2 Warp CD-ROM into the CD-ROM drive.
Note:
To open the DOS command prompt:
Select OS/2 System.
Select Command Prompts; then
select DOS Full Screen..
3
Open the DOS command prompt and change to the
drive for the CD-ROM drive.
4
Type CDINST and press Enter.
Make the copies of the OS/2 Warp diskettes labeled “OS/2
Installation Diskette” and “OS/2 Diskette 1.”
Note:
To shut down OS/2:
Move the mouse pointer to a
blank part of your OS/2 desktop.
Press the right click button.
Select Shutdown.
5
Shut down the system and turn off the computer.
6
Insert the OS/2 Installation Diskette into the external
diskette drive and turn on the computer.
7
When you are prompted to insert OS/2 Diskette 1, insert
it into the external diskette drive and the OS/2 Warp
CD-ROM into the CD-ROM drive.
8
Follow the instructions on the screen until the installation
is complete.
Be sure to pay attention to the following during installation:
Note:
If you have the OS/2 Warp 3.0
FixPak WFP_ (XR0W005), install it
after you complete the installation of
OS/2 Warp. Follow the instructions
in the README.1ST file in diskette 1
of that FixPak.
Select VGA as the Primary Display at the System
Configuration screen.
Do not select the PCMCIA Feature at the System
Configuration screen. Leave it as No Support Installed.
Select Non-Listed IDE CD-ROM for the CD-ROM at the
System Configuration screen.
9
Shut down OS/2 and restart the system.
If you want to continue to install all device drivers, continue with
“Installing the CD-ROM Device Driver for OS/2” on page 212.
208
IBM ThinkPad 760CD User's Guide
Title: C78TFMST CreationDate: 07/11/95 14:33:57