Using Passwords
Changing a Hard Disk Password
The procedure to change a hard disk password depends on whether
or not it is set to the same password as the power-on password.
When the hard disk password is set the same as the power-on
password:
1
Remove the passwords by following the steps in
“Removing a Power-On Password” on page 138.
This operation removes both the hard disk password and the
power-on password.
2
In Easy-Setup, set a new hard disk password.
See the
steps on page 140.
3
If you need a power-on password, set it in Easy-Setup.
When the hard disk password and the power-on password are
different, or the power-on password has not been set:
1
Turn off the computer and wait at least 5 seconds; then
turn it on.
2
If you have set a power-on password, type it; then press
Enter.
3
When the hard disk password prompt (
) appears, type
your
current
hard disk password; then press the
Spacebar.
4
Type the
new
password; then press the Spacebar.
Use no more than 7 characters.
5
Type the
new
password again to verify it; then press
Enter.
All the steps can be summarized as follows:
Current(space)New(space)New(Enter)
142
IBM ThinkPad 760CD User's Guide
Title: C78TFMST CreationDate: 07/11/95 14:33:57
Содержание ThinkPad 760CD
