IBM ThinkPad 760CD Скачать руководство пользователя страница 233

Страница: 233 / 370

Installing Mwave DSP Support Software for OS/2

After the installation is complete, remove any diskette
from the diskette drive; then restart OS/2 to activate the
Mwave DSP support software.

You have completed the installation of the Mwave DSP support
software for OS/2.

When You Use the WIN-OS/2 Environment

If you use the Mwave functions in WIN-OS/2:

1. Install the Mwave DSP support software for Windows in a full

screen WIN-OS/2 environment with the procedure on page
240.

2. Check your WIN-OS/2 Settings and modify them as follows,

referring to your OS/2 manuals:

WIN_RUN_MODE: 3.1 Enhanced Compatibility

HW_TIMER: ON

INT_DURING_IO: ON

DOS_BACKGROUND_EXECUTION: ON

You have completed the installation of the Mwave DSP support
software.

If you want to continue to install all device drivers, continue with
“Installing the Infrared Device Driver for OS/2” on page 218.

Chapter 7. Installing Software

217

Title: C78TFMST CreationDate: 07/11/95 14:33:57

Содержание ThinkPad 760CD



















































































































































































































































































































































































Результаты поиска

Содержание ThinkPad 760CD

Отзывы:

IBM ThinkPad 760CD, Руководство пользователя, Страница: 233 / 370

Результаты поиска

Содержание ThinkPad 760CD

Отзывы: