IBM System x iDataPlex dx340, Руководство по диагностике и обслуживанию

Страница: 121 / 196

Installing an I
2
C multiplexer card
To install an I
2
C multiplexer card in the I/O enclosure, complete the following steps.
1. Touch the static-protective package that contains the I
2
C multiplexer card to any
unpainted metal surface on the outside of the I/O enclosure; then, remove the
I
2
C multiplexer card from the package.
2. Slide the I
2
C multiplexer card under the mounting clips.
3. Install the retaining screws.
4. Reconnect the cables to the I
2
C multiplexer card.
5. Install the I/O enclosure (see “Installing an expansion enclosure on a
system-board tray” on page 74).
6. Install the system-board tray in the chassis (see “Installing the system-board
tray in a 2U chassis” on page 76).
Chapter 4. Removing and replacing server components
105