IBM System x iDataPlex dx340, Руководство по диагностике и обслуживанию

Страница: 90 / 196

Installing an expansion enclosure on a system-board tray
To install an expansion enclosure on a system-board tray, complete the following
steps.
Expansion
enclosure
System-board
tray
1. Orient the expansion enclosure above the system-board tray.
2. Lower the expansion enclosure so that the pins at the rear of the enclosure
slide down into the slots at the rear of the system-board tray.
3. If you disconnected cables when you removed the expansion enclosure,
reconnect them.
4. Pivot the expansion enclosure onto the system-board tray until it clicks into
place.
5. Install the system-board tray in the chassis (see “Installing the system-board
tray in a 2U chassis” on page 76 or “Installing the system-board tray in a 3U
chassis” on page 78).
74
System x iDataPlex dx340 Types 6385, 6386, 6389, 7831, 7832, and 7834: Problem Determination and Service Guide