IBM System x iDataPlex dx340, Руководство по диагностике и обслуживанию

Страница: 111 / 196

Installing the 2U chassis power supply
To install the power supply in a 2U chassis, complete the following steps.
Release
latch
Power supply
Power supply
1. Touch the static-protective package that contains the power supply to any
unpainted metal surface on the outside of the chassis; then, remove the power
supply from the package.
2. Insert the power supply into the front of the chassis.
3. Carefully guide the power supply into the guides at the left-rear corner of the
chassis until the release latch clicks into place.
4. Install the fan assembly (see “Installing the 2U chassis fan assembly” on page
81).
5. Install the top cover (see “Installing the 2U chassis top cover” on page 83).
6. Install the chassis in the iDataPlex rack (see “Installing the 2U chassis in a Type
7825 iDataPlex rack” on page 124).
Chapter 4. Removing and replacing server components
95