IBM System x iDataPlex dx340, Руководство по диагностике и обслуживанию, Страница: 125 / 196

b. If a hard disk drive is installed in the I/O enclosure, remove it (see
“Removing a 3.5-inch simple-swap hard disk drive” on page 90).
c. Make a note of where the hard disk drive bracket and cable assembly
cables are attached; then, disconnect them.
d. Press inward on the hard disk drive bracket and cable assembly release
latch; then, lift the assembly off the mounting tabs and out of the I/O
enclosure.
5. If you are instructed to return the hard disk drive bracket and cable assembly,
follow all packaging instructions, and use any packaging materials for shipping
that are supplied to you.
Chapter 4. Removing and replacing server components
109