IBM Redboks System x3550 M4 Скачать руководство пользователя страница 563

Страница: 563 / 820

806f0a0c-2014xxxx

An Over-Temperature Condition has been detected on the [PhysicalMemoryElementName] on

Subsystem [MemoryElementName]. (DIMM 20)

Explanation:

This message is for the use case when an implementation has detected an Over Temperature Condition

for Memory that has been Detected.

May also be shown as 806f0a0c2014xxxx or 0x806f0a0c2014xxxx

Severity:

Error

Alert Category:

Critical - Temperature

Serviceable:

Yes

CIM Information: Prefix:

PLAT and

ID:

0146

SNMP Trap ID:

Automatically notify Support:

User response:

Make sure that the fans are operating, that there are no obstructions to the airflow, that the air baffles are in

place and correctly installed, and that the server cover is installed and completely closed.

Make sure that ambient temperature is within the specifications.

If a fan has failed, complete the action for a fan failure.

Replace DIMM n. (n = DIMM number)

806f0a0c-2015xxxx

An Over-Temperature Condition has been detected on the [PhysicalMemoryElementName] on

Subsystem [MemoryElementName]. (DIMM 21)

Explanation:

This message is for the use case when an implementation has detected an Over Temperature Condition

for Memory that has been Detected.

May also be shown as 806f0a0c2015xxxx or 0x806f0a0c2015xxxx

Severity:

Error

Alert Category:

Critical - Temperature

Serviceable:

Yes

CIM Information: Prefix:

PLAT and

ID:

0146

SNMP Trap ID:

Automatically notify Support:

User response:

Make sure that the fans are operating, that there are no obstructions to the airflow, that the air baffles are in

place and correctly installed, and that the server cover is installed and completely closed.

Make sure that ambient temperature is within the specifications.

If a fan has failed, complete the action for a fan failure.

Replace DIMM n. (n = DIMM number)

806f0a0c-2014xxxx • 806f0a0c-2015xxxx

Appendix A. Integrated management module II (IMM2) error messages

545

Содержание Redboks System x3550 M4





















































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание Redboks System x3550 M4

Отзывы:

IBM Redboks System x3550 M4, Инструкция по установке и обслуживанию, Страница: 563 / 820

Результаты поиска

Содержание Redboks System x3550 M4

Отзывы: