IBM Redboks System x3550 M4 Скачать руководство пользователя страница 422

Страница: 422 / 820

Reboot the system.

(Trained technician only) If the error continues, replace the planar.

80070201-0301xxxx

Sensor [SensorElementName] has transitioned to critical from a less severe state. (CPU 1

OverTemp)

Explanation:

This message is for the use case when an implementation has detected a Sensor transitioned to critical

from less severe.

May also be shown as 800702010301xxxx or 0x800702010301xxxx

Severity:

Error

Alert Category:

Critical - Temperature

Serviceable:

Yes

CIM Information: Prefix:

PLAT and

ID:

0522

SNMP Trap ID:

Automatically notify Support:

User response:

Make sure that the fans are operating, that there are no obstructions to the airflow (front and rear of the server),

that the air baffles are in place and correctly installed, and that the server cover is installed and completely
closed.

Check the ambient temperature. You must be operating within the specifications (see Features and specifications

for more information).

Make sure that the heat sink for microprocessor n is installed correctly.

(Trained technician only) Replace microprocessor n. (n = microprocessor number)

80070201-0302xxxx

Sensor [SensorElementName] has transitioned to critical from a less severe state. (CPU 2

OverTemp)

Explanation:

This message is for the use case when an implementation has detected a Sensor transitioned to critical

from less severe.

May also be shown as 800702010302xxxx or 0x800702010302xxxx

Severity:

Error

Alert Category:

Critical - Temperature

Serviceable:

Yes

CIM Information: Prefix:

PLAT and

ID:

0522

SNMP Trap ID:

Automatically notify Support:

User response:

Make sure that the fans are operating, that there are no obstructions to the airflow (front and rear of the server),

that the air baffles are in place and correctly installed, and that the server cover is installed and completely
closed.

Check the ambient temperature. You must be operating within the specifications (see Features and specifications

for more information).

Make sure that the heat sink for microprocessor n is installed correctly.

(Trained technician only) Replace microprocessor n. (n = microprocessor number)

80070201-0301xxxx • 80070201-0302xxxx

404

IBM System x3550 M4 Type 7914: Installation and Service Guide

Содержание Redboks System x3550 M4





















































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание Redboks System x3550 M4

Отзывы:

Бренды по названию

Популярные бренды

IBM Redboks System x3550 M4, Инструкция по установке и обслуживанию

Результаты поиска

Содержание Redboks System x3550 M4

Отзывы:

Бренды по названию

Популярные бренды