IBM Redboks System x3550 M4, Инструкция по установке и обслуживанию

Страница: 49 / 820

The following table describes the functions of the SW3 switch block on the system
board.
Table 3. System board SW3 switch block definition
Switch
number
Default position Description
1 Off Reserved.
2 Off Reserved.
3 Off Reserved.
4 Off Power-on password override. Changing the
position of this switch bypasses the power-on
password check the next time the server is turned
on and starts the Setup utility so that you can
change or delete the power-on password. You do
not have to move the switch back to the default
position after the power-on password in
overridden.
Changing the position of this switch does not affect
the administrator password check if an
administrator password is set.
See “Passwords” on page 111 for additional
information about passwords.
The following table describes the functions of the button on the system board.
Table 4. Button on the server
Button name Function
Force NMI button This button is on the rear of the server. Press
this button to force a nonmaskable interrupt
to the microprocessor. You might have to use
a pen or the end of a straightened paper clip
to press the button. You can also use it to
force a blue-screen memory dump (use this
button only when you are directed to do so
by IBM Support).
Chapter 2. Installing optional devices
31