IBM Flex System p270 Compute Node Скачать руководство пользователя страница 199 | Manualshive

Страница: 199 / 510

IBM Flex System p270 Compute Node Скачать руководство пользователя страница 199

BA010008

Explanation:

The device_type property for this device is not supported by the iSCSI initiator configuration

specification.

Response:

1.

Reboot the server.

2.

If the problem persists: Search RETAIN tips and the firmware change history for the reference code to determine
the recommended actions. If a firmware update is needed, see Updating the firmware

BA010009

Explanation:

The arguments specified for the ping function are invalid.

Response:

The embedded host Ethernet adapters (HEAs) help provide iSCSI, which is supported by iSCSI software

device drivers on either AIX or Linux. Verify that all of the iSCSI configuration arguments on the operating system
comply with the configuration for the iSCSI Host Bus Adapter (HBA), which is the iSCSI initiator.

BA01000A

Explanation:

The itname parameter string exceeds the maximum length allowed.

Response:

The embedded host Ethernet adapters (HEAs) help provide iSCSI, which is supported by iSCSI software

device drivers on either AIX or Linux. Verify that all of the iSCSI configuration arguments on the operating system
comply with the configuration for the iSCSI Host Bus Adapter (HBA), which is the iSCSI initiator.

BA01000B

Explanation:

The ichapid parameter string exceeds the maximum length allowed.

Response:

The embedded host Ethernet adapters (HEAs) help provide iSCSI, which is supported by iSCSI software

device drivers on either AIX or Linux. Verify that all of the iSCSI configuration arguments on the operating system
comply with the configuration for the iSCSI Host Bus Adapter (HBA), which is the iSCSI initiator.

BA01000C

Explanation:

The ichappw parameter string exceeds the maximum length allowed.

Response:

The embedded host Ethernet adapters (HEAs) help provide iSCSI, which is supported by iSCSI software

device drivers on either AIX or Linux. Verify that all of the iSCSI configuration arguments on the operating system
comply with the configuration for the iSCSI Host Bus Adapter (HBA), which is the iSCSI initiator.

BA01000D

Explanation:

The iname parameter string exceeds the maximum length allowed.

Response:

The embedded host Ethernet adapters (HEAs) help provide iSCSI, which is supported by iSCSI software

device drivers on either AIX or Linux. Verify that all of the iSCSI configuration arguments on the operating system
comply with the configuration for the iSCSI Host Bus Adapter (HBA), which is the iSCSI initiator.

BA010008 • BA01000D

Chapter 8. Troubleshooting

187

«
...
197
198
199
200
201
...
»

Содержание Flex System p270 Compute Node































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов