IBM eServer 250 xSeries, Руководство пользователя

Страница: 77 / 186

Chapter 5. Installing options
63
f. Check the hard disk drive status indicators to verify that the hard disk drive
is operating properly.
If the amber hard-disk status light for a drive is lit continuously, that
individual drive is faulty and needs to be replaced. If the green hard-disk
activity light is flashing, the drive is being accessed.
Note: If your server has an optional ServeRAID adapter installed, you must
configure your disk arrays after installing hard disk drives. Refer to the
information that comes with your ServeRAID adapter for details.
Installing a 5.25-inch removable-media drive
Refer to the following illustrations when installing a 5.25-inch removable media drive.
Choose the bay in which you want to install the drive. Also, check the instructions
that come with the drive to see if you need to set any switches or jumpers on the
drive.
To install a removable-media drive in one of the left front bays:
Attention: When you handle static-sensitive devices, take precautions to avoid
damage from static electricity. For details on handling these devices, see “Handling
static-sensitive devices” on page 37.
1. Review the information in“Before you begin” on page 36 through “Safety
information statements” on page 38.
2. Turn off the server and all attached devices. Disconnect all external cables and
remove the top cover (see “Removing the server top cover and bezel” on page 40).
3. Remove the media-bay bezel.
4. Remove the filler panel from the bay opening. Keep the filler panel nearby.
Note: The server EMI integrity and cooling are both protected by having the left
front bays covered or occupied. When you install a drive, save the filler
panel from the bay, in case you later remove the drive and do not replace it
with another.
5. Touch the static-protective package that contains the drive to any unpainted metal
surface on the server; then, remove the drive from the package and place it on a
static-protective surface.
Drive
Slide rails
Filler panel with
EMI sheild
Slide rails for
use with a tape drive