IBM eServer 250 xSeries, Руководство пользователя

Страница: 113 / 186

Chapter 6. Solving problems
99
POST beep codes
Beep code Description Action
1-1-1 Adapter, DIMM, or I/O board and processor board has
failed Call for service.
1-1-2 Microprocessor register test has failed.
1-1-3 CMOS write/read test has failed.
1-1-4 BIOS ROM checksum has failed.
1-2-1 Programmable Interval Timer test has failed.
1-2-2 DMA initialization has failed.
1-2-3 DMA page register write/read test has failed.
1-4-3 Interrupt vector loading test has failed.
2-1-1 Secondary DMA register test has failed.
2-1-2 Primary DMA register test has failed.
2-1-3 Primary interrupt mask register test has failed.
2-1-4 Secondary interrupt mask register test has failed.
2-2-1 Interrupt vector loading has failed.
2-2-2 Keyboard controller test has failed.
2-2-3 CMOS power failure and checksum checks have failed.
2-2-4 CMOS configuration information validation has failed.
2-3-2 Screen memory test has failed.
2-3-3 Screen retrace tests have failed.
2-3-4 Search for video ROM has failed.
2-4-1 Screen test indicates the screen is operable.
3-1-1 Timer tick interrupt test has failed.
3-1-2 Interval timer channel 2 test has failed.
3-1-3 RAM test has failed above address hex 0FFFF.
3-1-4 Time-of-Day clock test has failed.
3-2-1 Serial port test has failed.
3-2-2 Parallel port test has failed.
3-2-3 Math Coprocessor test has failed.
3-2-4 Comparison of CMOS memory size against actual has
failed.
2-3-1
3-3-2
Screen initialization has failed.
I2C bus has failed.
Turn off the
server and then
restart the server.
If the problem
persists, call for
service.
Table 15. POST beep codes.