manualshive.com logo in svg

IBM eServer 250 xSeries, Руководство пользователя

Поделиться
Скачать
IBM eServer 250 xSeries Скачать руководство пользователя страница 70

 56

IBM® xSeries 250: User’s Reference

 

 

7.

Remove the SCSI backplane from the server:

a.

Lift the SCSI backplane guides from the corresponding slots on the server; 
then, slide the SCSI backplane upward.

b. Disconnect the power cable from the SCSI backplane. 

c.

Disconnect the SCSI cables from the channel A and B connectors on the SCSI 
backplane.

d. Lift the SCSI backplane from the server.

8.

Touch the static-protective package that contains the repeater card option to any 
unpainted metal surface on the server; then, remove the repeater card option from 
the package.

Note:

If necessary, refer to the documentation that comes with the repeater card 
option kit to assemble the repeater card option.

9.

Connect the repeater card option to the SCSI backplane:

a.

Align the corresponding connectors on the repeater card and the SCSI 
backplane. The corresponding screw holes on the repeater card and the SCSI 
backplane will automatically align.

b. Use a small, flat-blade screwdriver to connect the repeater card to the SCSI 

backplane with the two screws from the repeater card option kit.

c.

Secure the repeater card with the retention clips on the SCSI channel A 
connector on the SCSI backplane.

Backplane

SCSI repeater card

screws

Retention clips

Содержание eServer 250 xSeries



























































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды