IBM 88371RU, Руководство по техническому обслуживанию и устранению неисправностей

Страница: 21 / 186

Statement 5
CAUTION:
The power control button on the device and the power switch on the power supply do
not turn off the electrical current supplied to the device. The device also might have
more than one power cord. To remove all electrical current from the device, ensure
that all power cords are disconnected from the power source.
1
2
The server can be turned off in any of the following ways:
v You can turn off the server from the operating system, if the operating system
supports this feature. After an orderly shutdown of the operating system, the
server will be turned off automatically.
v
You can press the power-control button to start an orderly shutdown of the
operating system and turn off the server, if the operating system supports this
feature.
v
If the operating system stops functioning, you can press and hold the
power-control button for more than 4 seconds to turn off the server.
v If an optional Remote Supervisor Adapter II SlimLine is installed in the server, the
server can be turned off from the Remote Supervisor Adapter II SlimLine user
interface.
v
If the Wake on LAN feature turned on the server, the Wake on LAN feature can
turn off the server.
v The BMC can turn off the server as an automatic response to a critical system
failure.
v
You can turn off the server through a request from the BMC.
Chapter 1. General information
11