IBM 7012 G Series, Руководство по обслуживанию

Страница: 29 / 264

1-16
Service Guide
Service Inspection Guide
Perform a service inspection on the system when:
•
The system is inspected for a maintenance agreement.
•
Service is requested and service has not recently been performed.
•
An alterations and attachments review is performed.
•
Changes have been made to the equipment that may affect the safe operation of the
equipment.
•
External devices that have their own power cable are added.
If the inspection indicates an unacceptable safety condition, the condition must be corrected
before servicing the machine.
Note: The correction of any unsafe condition is the responsibility of the owner of the
system.
Do the following:
1. Check the covers for sharp edges and for damage or alterations that expose the internal
parts of the system unit.
2. Check the covers for proper fit to the system unit. They should be in place and secure
with the screws tight.
Media Bay A
(optional)
Front Door
Operator Panel
Media Bay B
(CD-ROM
drive)
Front Cover
Side Cover
Base
Rear cover
3. Power down the system.
4. Set the power switch of the system unit to Off.
5. Unplug the power cord.
6. Remove the covers.