IBM 7012 G Series, Руководство по обслуживанию

Страница: 18 / 264

Reference Information
1-5
•
NF256 board, based on 16M bit technology, which gives 256MB memory. It contains two
MM128 memory module kits.
•
NF512 board, based on 16M bit technology, which gives 512MB memory. It contains four
MM128 memory module kits.
•
NF1024 board, based on 16M bit technology, which gives 1024MB memory. It contains
four MM256 memory module kits.
Serial Port Splitter Cable
The splitter cable is used to generate two 25-pin serial ports (S1 and S2 ports).
It is installed in the 25-pin serial port located in the rear of the base unit.
Keyboard / Mouse Card (KBD)
The KBD card is used to manage the connectors dedicated to the keyboard, mouse and
speaker capability, but not a key click option on the base unit. It must be placed on the
dedicated connector of the system planar (Y10 connector), but interfaces with the system
through the Micro Channel bus, which sees the card as occupying a Micro Channel slot.
Connector used to place
the KBD card on the system
planar