IBM 7012 G Series, Руководство по обслуживанию

Страница: 262 / 264

Index
X-5
power-on from BUMP console, E-3
power-on using the power-on button, E-4
R
rear cover, removal and replacement procedure,
4-8
recognizing the new unit, expansion installation,
6-1
reference information, 1-1
power cables, 1-15
power flow, 1-12
rear view without cover, 1-2
service inspection guide, 1-16
side view without covers, 1-3
specifications, 1-14
system planar connector locations, 1-10
system unit locations
base unit, 1-1
expansion unit, 1-6
removal and replacement procedures, 4-1
adapters, 4-14
battery, 4-42
CPU card, 4-34
disk drive (base unit), 4-24
diskette drive, 4-29
fan, 4-19
front cover, 4-3
front fan, 4-20
key block, 4-49
media devices, base unit, 4-30
memory card, 4-36
operator panel, 4-11
power supply, 4-44
rear cover, 4-8
rs-485 card, 4-40
side cover, 4-6
simms, 4-38
system planar (elm), 4-46
system planar (tlm), 4-46
system unit base, 4-10
retainers
CPU card, 4-22
memory card, 4-22
rs-485 cable interconnection, expansion
installation, 6-1
rs-485 card, removal and replacement procedure,
4-40
S
safety notice, installation, 5-2
safety notices, definitions, xi
scsi cable connection, expansion installation, 6-1
service inspection
check point, 1-16
when to perform, 1-16
service inspection guide, 1-16
Service Line Speed Parameter, 2-37
Set Mode to Normal when Booting Flag, 2-36
setting voltage margins, 2-20, 2-33
side cover, removal and replacement procedure,
4-6
simms, removal and replacement procedure, 4-38
specifications, 1-14
standard I/O port, device connection, 5-4
static electricity discharge, 4-2
static-sensitive device, handling, 4-2
supply, power, removal and replacement
procedure, 4-44
system planar (elm), removal and replacement
procedure, 4-46
system planar (tlm), removal and replacement
procedure, 4-46
system planar connector locations, 1-10
system power states, E-1
system unit
device arrangement, 5-5
setting up, 5-4
system unit base, removal and replacement
procedure, 4-10
system unit locations
base unit, 1-1
expansion unit, 1-6
rear view without cover, 1-2
side view without covers, 1-3
system planar connector locations, 1-10
SystemGuard
BUMP overview, 2-2
common tasks, 2-39
authorize the service console, 2-43