IBM 7012 G Series, Руководство по обслуживанию

Страница: 179 / 264

System Installation
5-9
Step 6. Completing the Installation
Some of the following steps only apply to an initial installation. These steps are provided as
reminders in completing the installation or finishing a system upgrading activity.
1. If present, remove the CD ROM diagnostic disk from the appropriate drive, and store it in
the binder with the operator guides.
2. Set the mode switch to Secure.
3. Give the keys to the customer and explain the importance of keeping the reorder tag for
the keys in a safe place.
4. File a copy of the following items in the Account Management Planning Guide, form
number Z-ZZ9–0417:
•
Cable Planning Charts
•
SCSI Address Record from the
Installation and Service Guide
•
Machine History Card for each system unit and device.
5. Microcode must be installed during system installation or after the AIX operating system
is installed. If the system is using Version 4.1 (or higher) of the AIX operating system, all
microcode is preinstalled on the boot disk for all adapters and devices that were shipped
with the system.
Microcode is shipped on microcode diskettes, option diskettes and on the boot disk. For
the AIX operating system, runtime microcode maintenance can be selected from the
SMIT INSTALLATION AND MAINTENANCE MENU or from the Diagnostic Service Aid.
adfutil –m (command and flag) is normally used to install microcode shipped on option
diskettes.
If the system is using another type of operating system, that operating system should
include microcode installation instructions.
If you have the X.25 Interface Co-Processor or the 5080 Attachment Adapter, the
microcode for them is normally not shipped with the AIX operating system. The
microcode for these adapters must be installed before the adapters can be used. The
5080 Attachment Adapter Microcode is shipped on a microcode diskette. The X.25
Interface Co-Processor microcode is shipped on an option diskette.
6. Contact the person that is going to install the software or turn the system to the
customer.
If needed, go to the AIX operating system Installation Kit to install and configure the AIX
operating system.