
ibaBM-PN
Manual
Issue 1.9
41
9.2.4.2 “Digital” tab
The signals are declared in two steps. First of all, the words you want to acquire as
source for the digital signals have to be defined in sequential order.
Figure 23:
“Device slot decoder” module – “Digital“ tab
Enter here word signals, which contain the digital signals in sequential order. The col-
umns in the signal list have the following meaning:
Connector
Assign a meaningful name to the source word.
Address
The byte address of the signal within the input or output data range of the device.
The address range always begins with the address 0.
Data type
Data type of the signal. Here, you can only select the types WORD and WORD_B.
Active
With this option enabled, the source signal is acquired with its 16 digital signals and
also considered when checking the number of licensed signals. Individual digital
signals can be disabled.
For every source word, the list of 16 digital signals can be opened by clicking on the
plus sign. Here, the single bits of the source word are defined.
Name
Assign a meaningful name to the individual digital signals.
Active
Only when this option is selected, the signal is acquired and also considered when
checking the number of licensed signals.