IBA BM-PN Скачать руководство пользователя страница 18

Страница: 18 / 77

Manual

ibaBM-PN

Issue 1.9

Figure 5: Data acquisition with 2 devices and 2 controllers

In the example above, the two ibaBM-PN PROFINET devices are used by different

PROFINET controllers. For this purpose, each device has to be entered via the GSDML

file in the configuration of the respective PROFINET controller.
The installation location within the PROFINET line is

not

relevant. The PROFINET to-

pology can have a linear or a star structure.

8.3

Data acquisition as shared device

Figure 6:

Data acquisition as shared device

In the example above, an ibaBM-PN PROFINET device is used by several PROFINET

controllers. For this purpose, the device has to be entered via the GSDML file in the

configuration of all PROFINET controllers.
When configuring, please make sure that each slot of the device is assigned to exactly

one PROFINET controller. One slot cannot be used by more than one controllers. Both

PROFINET devices could be used as shared devices.
The installation location within the PROFINET line is

not

relevant. The PROFINET to-

pology can have a linear or a star structure.

Содержание BM-PN














































































Результаты поиска

Содержание BM-PN

Отзывы:

IBA BM-PN, Руководство пользователя, Страница: 18 / 77

Результаты поиска

Содержание BM-PN

Отзывы: