52
i3-TRNG-CAMS-Ax45RM_65RM-UM.indd
Rev. 161107
Note:
Be sure to stop all camera operations prior to firmware upgrade. Do not turn off
power or disconnect from the network during the firmware upgrade process.
Restart/Reset:
Reminder:
Default IP address is
192.0.0.16
, default Subnet:
255.255.255.0
.
Default Username/Password are
i3admin
/
i3admin
•
Click
Restart Camera
to
restart your Annexxus-series
camera and click
OK
in the
pop-up confirmation window.
This will cause a temporary disconnect, no video will be recorded while the
camera is restarting but all custom settings will be saved. Camera restart is
required after the firmware update.
•
Click
Factory Reset
to return all settings, except for the IP Address to factory
defaults. Click OK in the pop-up confirmation window to proceed.
•
Click
Hard Factory Reset
to return all camera settings, including IP Address, to
factory defaults. Click
OK
in the pop-up confirmation window to proceed.
Export Configuration:
•
Click
Export File
to export
your camera’s custom settings.
If you have multiple cameras of
the same model and you would
like to apply a set of custom settings to each one, exporting the configuration file
may save time.
•
Click
Browser
to locate a (*.tar.gz) configuration file to apply new settings to your
camera and click
Import File
.
After making any setting adjustments, remember to click the
Save
button to
save any changes made.
