44
i3-TRNG-CAMS-Ax45RM_65RM-UM.indd
Rev. 161107
6.9.4 Arming Schedule Setting > DEFOCUS
Defocus detection compares the sharpness of consecutive video frames.
Detected Defocus events can trigger a video clip or snapshot recording to the microSD
card. Audio output can also be enabled based on the same Schedule. On-screen display
and email notifications are available.
Note:
All linked actions configured in this setup tab are subject to arming schedule.
Tip:
Alarm OUT (Control) can be
triggered in response to detected
Defocus event as long as Alarm Out
device is correctly connected to
the camera, Digital Output Settings
are configured in the Alarm setup
tab and the “Defocus” checkbox is
enabled under Active Digital Output
for Events section.
•
Enable:
Check to Enable
Defocus event detection.
Store to SD Card:
•
Snapshot:
Check to save a
*.jpg snapshot to the microSD
after each Defocus event.
•
Record:
Check to save a
*.mp4 video clip to the microSD
after each Defocus event.
Audio:
•
Audio Out:
Enable Audio
Out to play a selected alarm
sound from the audio device connected to Audio Out port on the camera each time
Defocus event is detected.
•
Audio Sound:
Select one of 10 available alarm sounds to play each time Defocus
event is detected. Audio sounds are configured under Alarm setup tab.
On Screen Display:
On Screen Display feature will display entered text on the video screen whenever
Defocus event is detected.
•
Enable:
Check to enable On Screen Display text when Defocus event is detected
by the camera.
•
Text:
Enter the text that will be displayed at the time of Defocus event detection.
The OSD text settings are configured under Communication setup tab
(See Section
6.10 for more information).
Condition Settings for Sending E-mail by DEFOCUS:
Note:
SMTP settings must be configured for this feature.
•
Enable:
Check to Enable scheduled E-mail after each Defocus Event. Snapshot
image will be added to the email. Note that at least one MJPEG stream must be
enabled for this function in Video setup tab.
•
Subject:
Enter the E-mail subject.
•
Message:
Enter E-mail body message.
