Hypertherm HyPrecision 15, Руководство оператора

Страница: 175 / 194

HyPrecision15/30/50 Operator Manual 808240 175
8 – Pump specifications
Pump speci
fications
Lubricate the O-rings with hydraulic fluid or O-ring lubricant before assembly. Lubricate the threads of JIC steel fittings
with hydraulic fluid.
Steel JIC 37° Brass JIC 37° SAE O-ring boss
1/16-in. dash
size
Minimum Maximum Minimum Maximum Minimum Maximum
N∙m lbf ∙ ft N∙m lbf ∙ ft N∙m lbf ∙ ft N∙m lbf ∙ ft N∙m lbf ∙ ft N∙m lbf ∙ ft
-04 14 10 15 11 7 5 8 6 14 10 16 12
-06 23 17 26 19 16 12 20 15 24 18 27 20
-08 46 34 52 38 27 20 33 24 43 32 47 35
-10 68 50 76 56 46 34 54 40 62 46 68 50
-12 95 70 106 78 72 53 81 60 88 65 95 70
-16 127 94 141 104 100 74 111 82 125 92 136 100
-20 168 124 187 138 102 75 113 83 169 125 190 140
-24 212 156 235 173 107 79 118 87 203 150 224 165
CAUTION
Sizes -08 and smaller are less tolerant of overtorquing. Overtorquing reduces the clamping force, which
causes an insufficient seal.
Do not lubricate brass JIC fittings.
Do not use thread sealant on SAE hydraulic fittings.