HygroMatik WL-ROL 160-1200 Series, Руководство пользователя

Страница: 57 / 76

Page 57
Resetting the parameters to factory set-
tings (except password)::
» Switch off the system
» Press and hold and and
switch on the system. Only then
release the buttons.
RESET Passwort:
» Switch off the system
» Press and hold and ESC and
switch on the system. Only then
release the buttons.
11.6.14 Function test relay outputs
In this submenu you can check the relay out-
puts.
Display changes automatically
» Press the keys described below to
switch the relay.
» Press the key again to switch the
relay back.
» Press ESC to return to the main
menu
To avoid damage to the unit: Always acti-
vate the feed water valve first before acti-
vating the pump .
11.6.15 Function test alarm output
relay
In this submenu you can manually activate
the alarm output. The switched-on relay is
then reset to its switching status as pro-
grammed in submenu 12.
» Press “UP“ , to switch the relay.
» Press the key again to switch the
relay bac
» Press ESC to return to the main
menu
UP
Feed water valve
DN
Permeate flush valve V
PER
L
Concentrate-flush valve V
CONC
R
High pressure pump H
P
E
Dosingpump Antiscalant P
ASC
13 RESET
14 SYSTEM TEST
AU=ROHW L=SPUL
AB=PERM R=PUMPE
ENTER=DOS. PUMPE
ESC=TEST EXIT
15 ALARM TEST
16 LANGUAGE
UP=ALARM
ESC=TEST EXIT