HygroMatik WL-ROL 160-1200 Series, Руководство пользователя

Страница: 32 / 76

Page 32
» Close the vent screw (A) when the
transparent tube is completely filled
with the antiscalant mixture.
When the antiscalant mixture reaches the
pump, the "knocking noises" of the dosing
pump become quieter.
» Set the rotary knob to 30%.
When the antiscalant mixture is transported
bubble-free in the tube:
» Switch on the divider, the orange
LED lights up continuously.
L
During operation, you can directly change the
frequency of the dosing pump via the control
knob.
ED flashing states
When using other antiscalants, consult
HygroMatik.
8.6 Complete the initial start-up
Check mechanical intactness, water
connection and cabling
» Check functionality of water and
electrical installations
» Check functionality of the pre-treat-
ment system (if available)
Checking the feed water
» Check if the feed water parameters
are within the limits given in chapter
4.3.
To ensure the functionality of the seals, the
system must be put into operation within one
year of the delivery date.
8.7 Break of use
The functionality of the reverse osmosis plant
is connected to the continuous production of
permeate.
For a break in use of up to 10 days, the plant
should remain supplied with electricity and
water, because the plant periodically rinses
the membranes (a periodic rinse of 30 sec-
onds every 24 hours of break in use is fac-
tory-set). For breaks in use of more than 10
days up to a maximum period of 1-2 months,
the rinsing parameters should be set to 15
minutes every 48 hours.
During breaks in use, the extension vessel or
the return pump vessel (if present) must also
be emptied.
status LED (flashes per sec.) status pump operation
3x RED
Pump powered but
voltage too low
2x RED
Pump powered but
voltage too high
2x ORANGE Pump OFF and powered
leuchtet ORANGE, schaltet bei
jedem Klopfen aus
Pump ON
always on (RED) Level alarm