HygroMatik WL-ROL 160-1200 Series, Руководство пользователя

Страница: 43 / 76

Page 43
11.4 Setting options at operator
level
The following factory-set parameters can be
changed at the operator level (password
0077)
Setting the required conductivity:
By pressing the arrow keys
you can
set the max. set point
» Confirm the selection with
Setting the required flushing time / flush-
ing cycle:
By pressing the arrow keys you enter
the duration of the flushing time for the peri-
odic module flush..
» Confirm the selection with . The
program jumps to submenu "11H".
By pressing the arrow keys you spec-
ify the time period between the periodic mod-
ule flushes.
e.g. change 24h to 48h (usage pause)
» Confirm the selection with . The
program jumps back to the main
menu.
In the factory settings, parameter 11 CLEAN-
ING is preset to ON. If this setting has been
changed to OFF in the service level, no
entries can be made here in the operator
level.
Setting the required language:
In this submenu you can select the language
shown on the display.
» Press the arrow keys to
select your language
» Confirm the selection with . The
program jumps back to the main
menu.
3B LIMIT OUT
xx,x µS
11G TIME
00 min 00 sec
11H WASH CYCLE
00 min
15
sec 24 h
16 LANGUAGE
17 SET PASSWORTD
LANGUAGE
ENGLISH