HygroMatik WL-ROL 160-1200 Series, Руководство пользователя

Страница: 56 / 76

Page 56
By pressing the arrow keys you spec-
ify the time period between the periodic mod-
ule flushes.
e.g. change 24h to 48h (usage pause)
» Confirm the selection with . The
program jumps back to the main
menu.
11.6.12 Configuration of the alarm -
output relay
(See 11.7
wiring diagram)
» Press the arrow keys to to
turn the alarm output on or off.
» Confirm the selection with . The
program jumps to submenu "12B".
» Press the arrow keys to set
the switching direction.
N.O. CONTACT = The input functions as a
normally open contact.
N.C. CONTACT = The input works as a nor-
mally closed contact.
» Confirm the selection with . The
program jumps back to the main
menu.
11.6.13 Operating and service hour
counter
The operating hours counter always runs
when the system is in production mode. It is
for general information and has no further
control function.
It counts down the time. As soon as the coun-
ter has reached "0 hours", the following mes-
sage appears on the display: "EXECUTE
MAINTENANCE" (do maintenance).
The counter is set in the " 18 MAINTE-
NANCE" submenu.
» Press the arrow keys to
select, if the operation counter
should be reset.
» Confirm the selection with . The
program jumps to submenu "13B".
By pressing the arrow keys you select
if the service interval should be reseted.
» Confirm the selection with . The
program jumps back to the main
menu.
12 ALARM
13 RESET
12A ALARM
ENABLED
12B OUTPUT ALARM
CONTACT N.C.
13 RESET
14 SYSTEM TEST
13A RES HR COUNT
ENTER = YES
13B RES SERVICE
ENTER = YES