Hydrotec HYDROION VAD 125-CS 1, Руководство по эксплуатации и техническому обслуживанию

Страница: 15 / 98

15/98
Last change 10/2018 E-P | Subject to technical modifications
2. Technical Data
2.1 Technical data
HYDROION® VAS
– CS – A
Systems with full salting
(Type A)
25-CS
1 - A
50-CS
1 - A
75-CS
1 - A
125-CS
1,5 - A
150-CS
1,5 - A
200-CS
1,5 - A
250-CS
2 - A
375-CS
2 - A
600-CS
2 - A
Connection mains / soft water line DN 25 (1") DN 40 (1 1/2") DN 50 (2") DN 80
Drain line (mind.) DN 50 DN 50 DN 70
Mains electrical connection 230 V / 50 Hz AC 230 V / 50 Hz AC 230 V / 50 Hz AC
Electrical connection (secondary) 12 V AC 12 V AC 12 V AC
Water temperature (min./max.) 5 °C / 30 °C 5 °C / 30 °C 5 °C / 30 °C
Ambient temperature (min./max.) 5 °C / 40 °C 5 °C / 40 °C 5 °C / 40 °C
Operational pressure
(min./max.)
2)
2 bar / 8 bar 2 bar / 8 bar 2 bar / 8 bar
Performance data
Nominal flow
1)
m³/h 2.5 3.5 4.5 6.5 8.0 10.5 13.5 17.0 24.0
Flow rate at blending
(300 ppm to 60 ppm)
m³/h 3.1 4.4 5.6 8.1 10.0 13.1 16.9 21.3 30.0
Pressure loss at rated flow
1)
bar 0.43 0.66 0.88 0.78 0.65 1.14 1.05 1.34 1.94
Capacity at 300 ppm CaCO
3
1)
m³ 5.3 10.8 16.2 27.3 32.2 43.5 54.9 82.8 132.3
Salt consumption kg 5 10 15 25 30 40 50 75 120
Waste water volume per
regeneration
m³ 0.17 0.36 0.55 0.88 1.06 1.40 1.73 2.62 4.20
Volume and weights
Resin vessel volume Ltr. 38.4 79.5 115 153 277 277 344 473 704
Quantity of resin Ltr. 25 50 75 125 150 200 250 375 600
Quantity of gravel kg 4 7 10 17 40 40 40 58 40
Brine tank volume Ltr. 140 190 340 460 460 670 920 1000 1500
Regeneration salt supply kg 50 75 125 175 162 250 325 375 525
Operational weight
(complete unit) max.
kg 125 210 325 465 620 740 925 1210 1750
Dimensions
Height (max.) mm 1235 1530 1600 1600 1700 1700 2000 2200 2220
Ceiling height (min.) H mm 1800 1800 1900 1900 2000 2000 2200 2400 2500
Width (max.) B mm 910 960 1160 1360 1550 1730 1980 2050 2480
Depth (max.) T mm 600 600 725 850 850 1000 1150 1150 1500
Clearance tank/tank (ca.) A1 mm 510 530 630 760 820 900 1020 1070 1340
Diameter pressure tank D1 mm 258 310 363 413 555 555 555 635 779
Diameter brine tank
(min. / max.)
D2 mm
460 /
565
460 /
565
594 /
723
703 /
833
703 /
833
847 /
973
997 /
1123 1015 /
1120
1050 /
1150
Height pressure tank
(incl. foot)
H1 mm
897
± 6
1232
± 6
1344
± 6
1341
± 15
1434
± 15
1434
± 15
1721
± 15
1918
± 15
1892
± 15
Height top control valve H2 mm 1080 1420 1530 1570 1665 1665 1930 2130 2160
Height brine tank H3 mm 843 1123 1200 1196 1196 1196 1206 1340 1500
Height feed (mains
water) / discharge
(softwater)
H4 mm 960 1295 1400 1430 1520 1520 1810 2010 2040
Control box (W x H x D) mm 240 x 170 x 110
Mounting board (W x H x D) mm 330 x 200 x 10
1)
Parameters are dependent on operation mode and water input quality.
2)
At operating pressure min. the flow pressure is decisive, at operating pressure max. the static
pressure is decisive
For the use in the field of boiler feed water, preliminary treatment and reverse osmosis a project
planning is always required performed by our Applications engineering department!