Hydrotec HYDROION VAD 125-CS 1, Руководство по эксплуатации и техническому обслуживанию

Страница: 43 / 98

43/98
Last change 10/2018 E-P | Subject to technical modifications
Example 2:

Pre-
warn „power failure“

“power failure“ warning is shown in the controller

The warning record is shown even after the controller has been switched off and on again

If power supply was interrupted for a longer time period, no flow was determined during such
period and the capacity was not reduced

Manual regeneration is worthwhile then to avoid overriding the plant capacity

The warning record is acknowledged via the keys F3 or Enter
NOTE:
If several failures and alarms are evident, these must be eliminated and acknowledged all
one after the other.