Hydrotec HYDROION VAD 125-CS 1, Руководство по эксплуатации и техническому обслуживанию

Страница: 10 / 98

10/98
Last change 10/2018 E-P | Subject to technical modifications
Chapter
II
– Transport and storage
All system parts of the HYDROION
®
softener unit should be secured against jolting and
falling during transport and storage.
Appropriate means must be used in order to avoid and exclude any damage during transport.
The entire delivery must be checked for completeness and possible transport damage immediately
upon receipt at the warehouse / site.
Any transport damage must be notified to the supplier immediately.
Important!
Pressure tanks get damaged by shock load!
In order to protect the feet, the tanks shall be lifted for transport ( not tilted!).
The system and resin must be protected from frost during transport and storage
(recommended temperature 5-40°C). Storage outside these conditions can damage and
destroy the resin and resin vessel.
Components, fittings and pipes shall never be used for fixing of conveyor belts or other
supporting means of transport!
Do not lift the system via the components, fittings or pipes!
If disregarded, system components can easily get damaged and break/crack!
Regeneration material
Common salt (sodium chloride) supplied in tablet form according to EN 973 (DIN19604) is to be
used as the regenerant. Typically the salt is supplied in 25 kg plastic sacks which must be stored in
clean and dry areas only.
Hydrotec (UK) Ltd. is not a salt supplier. Supply of salt is the responsibility of the operator.