Hydrotec HYDROION VAD 125-CS 1, Руководство по эксплуатации и техническому обслуживанию

Страница: 21 / 98

21/98
Last change 10/2018 E-P | Subject to technical modifications
Micro processor control Micro processor control in wall-mounted
casing, menu driven for different operation
modes such as:
- volume control with temporally priority circuit
- time control
- quality control in combination with
hardness control
- forced regeneration
- water refresh
- automatic disinfection
- external release
- external regeneration
-
“brine alarm” - sensor in brine tank
(Function even at 2 brine tanks)
-
“pressure alarm” - sensor
Hygienic operation of softener in two steps:
Phase 1: Refresh
(Interval rinsing / water-refresh)
For prevention of stagnation phases a switch
between both vessels takes place in short
intervals. Stagnated water is minimized in
stand-by.
Interval rinsing:
At this setting the stagnated
water (defined volume) is led directly into the
drain line.
Water-refresh: In contrast to interval rinsing
the stagnated water (defined volume) is led
into the soft water system instead.
Phase 2: Disinfection
Is possible during regeneration.
Functions and messages:
- Diagnostic mode
- Error list (emBrick list) for errors
occurring during operation of the
controller
-
Information mode with display on
monitor
-
LED signal malfunction / operation
-
universal output (maintenance /
regeneration / brine lack)
The electronic controller is pre-installed and
pre-assembled on a mounting plate and ready
for wall mounting.
Water meter HYDRO ION
®
VAS
– CS 1
The water meter 1” is integrated in the casing
of the control valve.
fig.7