HydraMaster CTS 330, Руководство пользователя, Страница: 97 / 151

HydraMaster Corporation
Page 10-4 : CTS 330 Owner’s Manual
CTS 330
Hot Carbonating Truckmount System
5.5. Inadequate fuel supply to the carburetor . Test the fuel volume at the carburetor
by removing the fuel line from the carburetor inlet and placing the line in a metal
container with a minimum of 16 oz capacity. Turn on the ignition switch to operate
the fuel pump. The fuel flow volume should be 12 oz / minute. Check for clogged
filter or obstructed fuel line. Also check to make sure the fuel pump is mounted
vertically and is close to the fuel source. Repair as necessary.
6.0. Runs rich (Black smoke).
6.1 . Dirty air filter . Inspect and replace as necessary.
6.2. Choke is partially closed. Inspect and adjust or repair as necessary.
6.3. Excessive fuel to carburetor . Insure that fuel pump is proper PSI rating. A fuel
pump with a psi rating in excess of that of the pump supplied with the machine
could overpower the inlet valve in the carburetor, causing excessive fuel to be sup-
plied to the carburetor.
7.0. Engine overheats
7.1. Poor ventilation in vehicle . All cargo area doors must be open for proper ventila-
tion. Roof vents are strongly recommended for machines that are operated in hot
climates. Any item that might restrict air flow to the machine such as other equip-
ment or a solid divider should be moved or modified to permit proper air flow.
7.2. Low engine oil level . Check oil level and replenish as necessary.
7.3. Engine rpm too high . Check RPM with an accurate tachometer. Adjust as neces-
sary to 3400 rpm (no load).
7.4 . Restricted engine or blower exhaust . Disassemble exhaust components to lo-
cate restriction. Repair as necessary.