HydraMaster CTS 330, Руководство пользователя

Страница: 36 / 151

HydraMaster Corporation
Page 4-6 : CTS 330 Owner’s Manual
CTS 330
Hot Carbonating Truckmount System
Recovery Tank (cont.)
5. Rinse out the recovery tank thoroughly. Perform this operation daily.
6. Clean vacuum relief box as necessary (
Figure 4-11
).
7. Replace all parts before starting up machine.
Solution System
Quick Reference List:

Remove filters

Clean filters

Remove orifice

Clean orifice

Inspect manifold

Rinse tanks
Orifice Quick Connect Assembly
The orifice assembly is located on the side of the solution tank bracket, in line with the
outlet hose. The purpose of the orifice manifold is to control the amount of solution being
used and to filter any debris from entering the system.
Tools:

3/32 Allen wrench
Orifice and Filter Maintenance
1. Position Compressor Valve to PRESSURE
RELIEF.
2. Remove the filter by disconnecting the stainless
steel quick connect (
Figure 4-12
).
NEVER disconnect under pressure!
Figure 4-11
WARNING
!
Figure 4-12