HYBREX G1E, Инструкция по установке и программированию

Страница: 168 / 219

152
Issue 3.3.2 / April, 2011
Program 47-stn-IP : Hot Line Assignment
47-stn HOT LINE
000
St = Station No. (2-4 digits)
Data. ( Extension Mode )
47-stn HOT LINE
SPD:000 St= Station No. (2-4 digits)
Data. ( SPEED DIAL Mode )
General:
This feature allows a user to lift the handset and directly call a specific outside party through System Speed Dial
or an Intercom Extension without dialling any digits.
*
Pressing [SPK] on a Keyphone allows the Hot line to be over-ridden.
Description:
1. Enter a System Speed Dial Number for an outgoing call or a Station Number for an Intercom call.
Example:
47- 115 HOT LINE
SPD:101
115 = Station No. ( 3 digits )
7 Speed Dial 101 (for example: 94150100)
When the user lifts the handset, the System will automatically call 9425010 through System Speed Dial 101.
2. Press
{MIC} to select a hot line Intercom. (Press again to go back to SPD assignment), the display shows:
47-115 HOT LINE
00 z Enter an Extension number 118
47-115 HOT LINE
118
z The system calls Extension 118 when the handset is
lifted.
The Hot Line is the recommended method of connecting a Fax machine to the system. Use a spare analogue
port and make the Fax extension a Hot Line to an unused Speed Dial number and allocate the fax line to be
used by that Speed Dial. Do not program any number into the Speed Dial. When the fax goes off line it will select
the Fax line and then wait for the Fax to dial the number required.