HYBREX G1E Скачать руководство пользователя страница 132

Страница: 132 / 219

116

Issue 3.3.2 / April, 2011

Program 09-nnn-DP : System Speed Dial

09-nnn-DP TK:tt nn
nnnnnnnnnnnnnnnn

nnn = 100-999 DP = 01-30 tt = 01-10 nn = 40-43
Telephone number.

General:

This program permits the assignment of up to 900 sets of system speed dialling codes. If Names are enabled
(default) then only 500 Speed dials are available. If all 500 are allocated with names to System Speed dial then
there are no Personal speed dials available for users. In default 100 System Speed dials are enabled (100-199)

Description:

nnn

= 100-999

= Speed dial code, up to 900 sets in total.

= 01-30

= Digit Pointer for telephone number. 30 digits per speed dial code.

= 01-10

= Pre-assigned CO line number.

nn=40    : CID Call Blocking is enabled. It will not ring but LED will be flashing.
nn=41   : CID Call Blocking is enabled. The call will be transferred to the virtual voice mail (No. 141).
nn=42   : CID Call Blocking is enabled. The call will be transferred to the virtual voice mail (No. 142).
nn=43    : Call Blocking is enabled. The call will be transferred to the virtual voice mail (No. 143).
A VMC must be installed to allow Call Blocking transfer to Virtual Voice Mail to be enabled.
Call Blocking is enabled in Mode 05-17-07.
Press the

{Change}

key twice to change or clear the settings for CID Call Blocking.

Pre-Assigned CO Line
Press the

{Change}

key to change or clear the Pre-assigned CO line number. This CO line is the dedicated

outgoing line for the speed dial code. If the user presses a speed dial code without selecting a CO line first, the
system will select this CO Line automatically. If no CO line is assigned, the system will select an available CO
line according to the assigned Dial 9 group (Program 41-nnnn-04). A line may also be selected directly by the
user.

Telephone Number

30 digits maximum may be entered in each memory. In addition to the digits 1 to 0, *, # the following can also be
stored: Pause, Flash, Pulse to DTMF. Each function occupies one digit.

"Pause" is represented by the

[HOLD]

key.

-- P

"Flash" is represented by the

[TRF/FL]

key.

-- F

"Pulse to DTMF" is represented by the

{P->T}

key.

-- T

i) Pause:
During dial procedures on PSTN line, the dialling will wait for a programmable period(Refer Program 05-01-06).
During dial procedures on ISDN line, the dialling will wait for the called party to answer the call.

For example,

Store 29611356ppp506 in speed dial and use this speed dial on ISDN line to dial out. The system will dial
506 in DTMF after the called party answers the call (it could be the auto attendant or voice mail)

ii) Flash : This will make a loop disconnection of a pre-assigned duration. (Refer program mode 05-02-05).
iii) Pulse to DTMF : If the dialled signal is "pulse", it will change to "DTMF".

Note:

Pressing

{Don’t Care}

will erase the digit which the cursor is on.

Pressing

[REDIAL]

will erase all the assigned digits.

Associated program modes. 05-05-05, 05-04-06, 05-17-07, 43-51-05, 43-52-05, 43-53-05.