HYBREX G1E, Инструкция по установке и программированию

Страница: 77 / 219

G1E Programming Manual
61
6. Lunch ringing is programmed in Mode 94.
Program 03-01-IP : Door Phone Ringing Assignment
03-01-IP Door
111 112 113 114
IP = 01-26
Assigned station number.
General:
This program assigns the Door Phone/s to ring the programmed stations.
Description:
1. To assign an ACP or digital door phone to follow Mode 03 it must be set to “d” in mode 46-st-07.
Otherwise it will ring the stations assigned in the Hunt Group allocated in mode 46-st-07
2. Twenty six stations can be assigned to ring for the door phone.
3. To clear all entries press
[REDIAL] .
4. Door phone ringing time is set in Mode 05-11-07.
5. Door Relay Unlock Time is set in Mode 05-12-04.
6. Door phone Ringing frequency is set in Mode 05-03-08.
Program 04-gp-IP : Console Assignment
04-gp-IP Console
111 000 000 000 gp = Station group (01-08) IP = 01-04
Assigned station number(2 to 4 digits).
General:
This program permits the selection of the consoles in each station group. Consoles are stations that can
program System speed dials, Record system Voice messages, receive hold recalls and ring when
callers dial 9/0 for the operator. For DISA calls only the ring type is Common Audible otherwise Linear is
standard
Description:
1. There are 8 console groups available.
2. A total of four stations can be set to be the console in each group.
3. The first assigned station is the master console.
4. To clear all entries press
[REDIAL] . Do this in ALL unused groups.
5. It is recommended that only one console is used per group.