HYBREX G1E, Инструкция по установке и программированию

Страница: 86 / 219

70
Issue 3.3.2 / April, 2011
Program 05-05-IP : System Timing Parameters – 05
05-05-IP SYS PAR
0 0 0 0 3 1 1 0 IP = 01-08
System Default.
Item Display
Pointer Data Programming Data Description Default
-------- ----------- ---------------------------------------------------------- ------------
01 0-3 Morning Call Type 0=MBU Message
02 0-1 Meter Pulse Detect 0=Enable
03 0-5 Speed Dial Unrestricted-1 0=0
04 0-9 Speed dial Unrestricted-2 0=0
05 0-7 Name Feature For Extensions, Trunks, Speed dials 3=enable
06 0- Reserved 0=
07 0-9 Auto Redial Times 1=2 Times
08 0-9 Auto Redial Pause Time 0=10 Sec.
Description:
01. Morning Call:
This parameter is for the Hotel/Motel environment to decide what an extension will hear upon receiving a
wake up call.
0 = Voice message (MBU Flash)
1 = Back-ground music or DND tone.
2 = VSC + Record Morning Call History via SMDR
3 = Back-ground music or DND tone + Record Morning Call History via SMDR
Up to software version 12q the wake up message is sourced from the VMU card, from version12r it is
sourced from the MBU card. To record the morning message press [8901][password][2][3][3] from the
console
Each station can be set in Mode 44-st-08 to decide whether to hear Background Music or DND tone.
To record Morning call dial [8901][Password (Default=1234)][2][3][3] from the console.
02. Metering Detector:
If setting is Enable, the system will detect the metering signal from the Exchange during the
conversation.
0 = Enable 1 = Disable
03, 04. Speed Dial Unrestricted 1, 2:
If 03, 04 settings are A, B, then the speed dial codes from 100 to AB0 are not toll restricted. For example
if the settings are 1 and 1 then Speed dials up to 110 can be used by stations whether they conflict with
toll restrictions or not. Individual stations can be restricted from using this feature in Mode 45-st-07.
If 03, 04 settings are set to 0, 0, then all speed dial codes are toll restricted if the station using the speed
dial is restricted.