HYBREX G1E, Инструкция по установке и программированию

Страница: 170 / 219

154
Issue 3.3.2 / April, 2011
Program 48-stn-IP : Station Class of Service – 7
48-stn-IP STCOS
0 0 0 0 0 0 0 0
st = Station No. (2-4 digits) IP = 01-08
System Default
Item Display
Pointer Data Programming Data Description Default
---------- ---------- ----------------------------------------------------------- -----------
01 0- Auto Recording Incoming Calls 0= Disable
02 0- Auto Recording Outgoing Calls 0= Disable
03 0- Group Listen Feature 0= Enable
04 0- Reserved 0= 0
05 0- Reserved 0= 0
06 0- Reserved 0= 0
07 0- Reserved 0= 0
08 0- Reserved 0= 0
General:
This program permits each station to be assigned to a different Class of Service.
Description:
01. Auto Recording Incoming Calls:
This parameter enables the Recording to the VMU of all incoming calls automatically. Not recommended with
VMU as capacity is not large enough.
0 = Disable 1 = Enable
02. Auto Recording Outgoing Calls:
This parameter enables the Recording to the VMU of all outgoing calls automatically. Not recommended with
VMU as capacity is not large enough.
0 = Disable 1 = Enable
03.Group Listen Feature:
This parameter enables/disables the Group listen feature available on some versions of DK2 and DK6 handsets
Some users of these handsets will experience feedback sound when switching to handsfree mode from headset
only if they do it slowly so this enables the feature too be disabled when required.
0 = Enable 1 = Disable
04.Reserved: