Huawei OceanStor S5600 Скачать руководство пользователя

Страница: 108 / 145

NOTE

For the situation that the disk capacity is more than 2 TB, choose

Storage

Disk management

on the

navigation tree, the disk capacity displayed on the interface might be abnormal, but this does not affect the
normal use of the LUN.

Step 10

Partition and formatting.

NOTE

It is recommended to wait a few minutes before performing the first formatting. Otherwise, the formatting
might fail. Try later if the first formatting fails.

----End

3.13.2 Linux AS

Use a LUN on a Linux server.

Prerequisite

Take the AS installed with SLES9 SP3 as an example to introduce using a LUN on the AS.

NOTE

For an AS installed with other Linux OSs, perform the steps as required.

Procedure

Step 1

Step 2

Check whether the AS is installed with the UltraPath.

Enter:

rpm

–q UPforLinux

If the software is not installed, the following information is displayed.

package UpForLinux-11.01.01.T06-1 is not installed

If the software is installed, the following information is displayed.

UpForLinux-11.01.01.T06-1

NOTE

This section takes 11.01.01.T06-1 as an example to describe the UltraPath version. The version of the
UltraPath installed on site might be different.

Step 3

Start the port services on the AS.

If the ports are iSCSI host ports.
Check whether the AS is installed with the UltraPath.

–

The UltraPath is not installed.
Enter:

/etc/init.d/iscsi restart

This command starts the iSCSI service to scan new LUNs.

–

The UltraPath is installed.
Enter:

3 Configuring the Storage System

OceanStor S5600 Storage System

Initial Configuration Guide

3-54

Huawei Proprietary and Confidential

Issue 02 (2009-09-30)

Содержание OceanStor S5600


















































































































































Результаты поиска

Содержание OceanStor S5600

Отзывы:

Похожие инструкции для OceanStor S5600

Бренды по названию

Популярные бренды

Huawei OceanStor S5600, Руководство по начальной настройке

Результаты поиска

Содержание OceanStor S5600

Отзывы:

Похожие инструкции для OceanStor S5600

Бренды по названию

Популярные бренды