manualshive.com logo in svg

Huawei 9000 VCT V100R011, Руководство администратора, Страница: 164 / 204

Поделиться
Скачать
Huawei 9000 VCT V100R011 Скачать руководство пользователя страница 164

l

Version information: terminal model, terminal serial number, software version, and
hardware information

l

Specifications: main features supported by the terminal, such as the 3G network, audio
protocol, video protocol, interfaces, bandwidth, built-in MCU, and dual-stream mode

----End

11.1.5 Viewing Logs

The terminal logs all non-query events when the terminal is operating in real time, including
user activities and commands. The logs help with device maintenance, fault identification, and
auditing.

Context

The terminal can save a maximum of 10000 logs. When the memory for recording the logs is
full, a new log can still be recorded. The latest log will replace the oldest one.

The logs are sorted by time. Turn pages to view more entries. To display the details of a log,
scroll to the log, and then select 

Details

.

Each log records the following information:

l

Event time

l

Terminal-defined event name

l

Event level

l

Terminal-defined event type

l

Event details

Select 

Query

 to search for logs based on different conditions.

Procedure

Step 1

From the home screen, select 

Diagnostics

 to display the 

Diagnostics

 screen.

Step 2

Select 

Logs

 to display the 

Logs

 screen.

----End

11.2 Software Upgrade

The terminal supports the following software upgrade methods: locally, with the bootrom, or
from the web interface.

CAUTION

During the upgrade, do not power off the terminal to prevent faults that cannot be rectified.

Table 11-2

 describes the differences during the three upgrade methods.

HUAWEI 9000 HD Video Terminal
Administrator Guide

11 Maintenance and Troubleshooting

Issue 09 (2012-09-03)

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

152

Содержание 9000 VCT V100R011













































































































































































































Отзывы:

Нет отзывов