manualshive.com logo in svg

Huawei 9000 VCT V100R011, Руководство администратора, Страница: 75 / 204

Поделиться
Скачать
Huawei 9000 VCT V100R011 Скачать руководство пользователя страница 75

4.1 Connecting an Audio Input Device

Study the terminal audio input interfaces before connecting the terminal to an audio input device
so that connections can be made quickly and properly.

Table 4-1

 describes the types of audio input interfaces and supported audio sources.

Table 4-1

 Description of audio input interfaces

Audio Input
Interface

Type

Features of the Audio That Can
Be Received

MIC 1

XLR cannon connector

Mono audio channel/Stereo
microphone

MIC 2

XLR cannon connector

Mono audio channel/Stereo
microphone

MIC LAN-POE

LAN network interface

Microphone array

AUDIO IN (L
and R)

RCA interface

Mono audio channel/Stereo line
input

 

4.1.1 Connecting a VPM210 Microphone Array

When cascading the HUAWEI VPM210 microphone arrays (VPM210s or microphone arrays
for short), ensure that the connection between the primary and secondary microphone arrays is
proper.

The microphone array can work with the HUAWEI 9000 HD terminal series. Each terminal can
support the cascading of up to three VPM210s. When two or three VPM210s are cascaded, one
functions as the primary microphone array and the others as the secondary microphone arrays.
The audio data collected by the secondary microphone arrays is sent to the primary microphone
array for mixing. After the data for the left and right audio channels is generated, the primary
microphone array sends the data to the terminal. Note that a microphone array is assigned as
primary array not due to any scientific reasoning but for logical purposes and that a primary
microphone array is not necessarily the microphone array that is nearest to the HD terminal.

Status Indicators on the VPM210

The status indicators can indicate the current working status of the VPM210 quickly.

Table 4-2

 and 

Table 4-3

 describe the status indicators.

Table 4-2

 Description of the status indicators on the VPM210

Indicator Status

Status of the VPM210

The indicators are all in red.

The microphone is muted.

The indicators are all in blue.

The VPM210 is working properly.

HUAWEI 9000 HD Video Terminal
Administrator Guide

4 Microphone and Speaker

Issue 09 (2012-09-03)

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

63

Содержание 9000 VCT V100R011













































































































































































































Отзывы:

Нет отзывов