![background image](http://html.mh-extra.com/html/ht/combig2/combig2_user-manual_2178066033.webp)
Gx
Series
EN - 32
Mode
6.3.5.
The standard defines, for
molded case type STD
, the tripping times for RCDs at nominal
current. The mode is used to detect the minimum tripping current (which could also be
lower than the nominal voltage).
9. Press the
GO/STOP
key
for few seconds
on the
instrument or the
START
key on the remote lead. The
instrument will start the measurement.
The screen to the side is shown on the display when
the hourglass icon indicates the performance of the
test.
10 At the end of the test, if the tripping current is within the
values of the table in the relevant § 11.1, the instrument
displays the
symbol to indicate the positive
outcome of the test and displays a screen like the one
to the side.
Press the
SAVE
button or touch the
icon to save
the measurement (see § 7.1).
11 At the end of the test, if the tripping current is not within
the values of the table in the relevant § 11.1, the
instrument displays the
symbol to indicate the
negative outcome of the test and displays a screen like
the one to the side.
Press the
SAVE
button or touch the
icon to save
the measurement (see § 7.1).
12
For RCD type A and B
it is possible to have a positive
outcome also if the result is higher then the selected
nominal current. This is due to the “REAL” option
visualization selected (see § 6.3 – point 6)