COMBI521
EN - 114
8. CONNECTING THE INSTRUMENT TO THE PC
The connection between a PC and the instrument can be done via a serial port (see Fig.
1 – part 4) by means of an optical cable/USB C2006 or by means a WiFi connection.
The
choice of the type of connection must be made within the management software (see the
help on line of the program)
CAUTION
In order to transfer the data onto a PC by means of an optical cable/USB
C2006 it is necessary to install beforehand both the management software
and the drivers of cable C2006 on the PC itself.
Before connecting, it is necessary to select the port to be used and the
correct baud rate (57600 bps) on the PC. To set these parameters, launch
the provided management software and refer to the program’s on-line help.
The selected port must not be engaged by other devices or applications,
e.g. a mouse, a modem, etc. Close any applications running using the
Microsoft Windows Task Manager function, if necessary.
The optical port emits invisible LED radiations. Do not directly observe with
optical instruments. Class 1M LED apparatus according to standard IEC/EN
60825-1.
To transfer data to the PC, follow this procedure:
1. Switch on the instrument by pressing the
ON/OFF
key.
2. Connect the instrument to the PC via the provided optical/USB cable
C2006
.
3. Press the
ESC/MENU
key to open the main menu.
4. Use the arrow keys (
,
) to select “
PC
”, to access data transfer mode and confirm
with
SAVE/ENTER
.
MENU
15/10 – 18:04
S E T :
S e t t i n g s
M E M : D a t a
s a v e d
P C
: D a t a t r a n s f e r
5.
The internal WiFi module is automatically activated and provides the followed screen
:
PC
15/10 – 18:04
PC Connection
WiFi ON
6. Use the software controls to activate data transfer (please refer to the on-line help of
the program).
Содержание COMBI521
Страница 1: ... Copyright HT ITALIA 2021 Release EN 1 01 27 09 2021 COMBI521 User manual ...
Страница 143: ......